Tegemist on WinCE 5 peal jooksva masinaga aga minul on mõistus otsas...ei saa ma teda lahti ja tema enda pakutavad kaardid on pehmelt öeldes alla arvestuse. Olen taga jännanud igatmoodi, aga kuna tundub et elu toimub vaid kaardilt....no ei ole ma loll arvutite ja elektroonika kohapealt aga nyyd abi vaja.
Olen proovinud MioPocketit aga muuda neid nimesid kuidas tahab tulemuseks ikkagi ei midagi

Mingit infot ka kohas kust selle rumalast peast ostsime Navigatsiooniseade ROUTE 66 MINI (17494847) - Osta.ee

Oskab ehk keegi aidata sest selle masina endakohta pole eriti kuskilt inffi saada

hahh...viimased kaks päeva higistanud..kopid igo peale ja ei juhtu peale errori midagi..error väljendub suures küsimärgis mälukaardi pildil...

sys.txt äkki vaja õigeks saada

Proovi nimetada iGO programmi .exe fail sama nimega, mis on Route 66 exe fail ehk see aitab. Tavaliselt on nii tööle hakanud.

leidsin sellise õpetuse:
I have a Route 66 Chicago and have IGO8 and Amigo running on it. Not sure what your difficulty is, but the key things are:

1. Use mortscripts to simulate the Route 66 Chicago file structure on the SD card.
- In the SD card, have a directory named Route66 and place into it the mortscript exe, the script file and the mortrunner exe,

MortScript.exe

R66Navigate7.exe <--- mortrunner exe needs to be the name of the exe you are tying to emulate

R66Navigate7.mscr <--- contains the instructions you wish to run. If you just want to run a single App, use a single line like this:

run("\Storage Card\IGO8\IGO8,exe")

2. Compress the exe (eg. IGO8.exe) you are attempting to run. I use UPX Shell with 2.92b compression.

IGO 8 and Amigo are straight forward to get to work once the compression is complete.

kõige vägevam on veel see et just avastasin et Route66Synk EI sisalda samanimelist navi. Kuid kõiki muid on nagu raba millele saab softi uuendust teha,kui valida other ja edasi windows mobile siis sikutab alla ja konfib elueest, installi alguses ilmub navi ekraanile mingi jutt mingist failist mis ei ole VALID FOR WINDOWS CE..wtf ??? ja siis jääbki installima...jätan ta ööseks tegutsema eks vaatan mis hommikuks on saand...

Algselt postitanud urxz

leidsin sellise õpetuse:
I have a Route 66 Chicago and have IGO8 and Amigo running on it. Not sure what your difficulty is, but the key things are:

1. Use mortscripts to simulate the Route 66 Chicago file structure on the SD card.
- In the SD card, have a directory named Route66 and place into it the mortscript exe, the script file and the mortrunner exe,

MortScript.exe

R66Navigate7.exe <--- mortrunner exe needs to be the name of the exe you are tying to emulate

R66Navigate7.mscr <--- contains the instructions you wish to run. If you just want to run a single App, use a single line like this:

run("\Storage Card\IGO8\IGO8,exe")

2. Compress the exe (eg. IGO8.exe) you are attempting to run. I use UPX Shell with 2.92b compression.

IGO 8 and Amigo are straight forward to get to work once the compression is complete.

aga mul pole chicago...on mudel nimega Mini, aga tänks, ex katsun seda kah vähe näppida siis...

Igatahes on veelgi pikem juhend netis, kopin igaks juhuks siia:
Put the SD you want to use in a PC before you start.
The assumption here is that the PC is running some form of Windows.

1. Put IGO8 on the SD card.

2. Note the path to the executable that you need to launch.
eg. IGO8\IGO8.exe

3. Create a directory named "Route66" on the root of the SD card. Obviously don't use the quotes ;-)

4. Copy the following files to "Route66" directory (use Google to get them):
MortScript.exe
mortrunner.exe (I think is the default name)

5. Create a text file named "R66Navigate7.mscr" in "Route66".

6. Edit the "R66Navigate7.mscr" file.

7. Enter the path to the IGO8 exe using this format:
RunWait("\Storage Card\<path to exe>")

My example is:
Run("\Storage Card\IGO8\IGO8.exe")

8. Rename the the mortrunner.exe to "R66Navigate7.exe"

9. Create a directory named "AudioPlayer" on the root of the SD card.

10. Copy the following files to "AudioPlayer" directory :-
MortScript.exe
mortrunner.exe

11. Create a text file named "AudioPlayer.mscr" in "AudioPlayer".

12. Edit the "AudioPlayer.mscr" file.

13. Enter the path to the control panel using this format:
Run("\windows\control.exe")

14. Rename the the mortrunner.exe to "AudioPlayer.exe"

15. Compress IGO8.exe using UPX Shell with 2.92b compression (use Google to find UPX shell).
Note: Compression of the MortScript.exe's, R66Navigate7.exe and AudioPlayer.exe may be
needed aswell. Can't remember what I did.
Try it without, if an error like "Not a Valid WINCE app" is displayed, then compress them.

16. The structure of the SD card should look like this:

+-Route66
| - MortScript.exe
| - R66Navigate7.exe
| - R66Navigate7.mscr
|
+-AudioPlayer
| - MortScript.exe
| - AudioPlayer.exe
| - AudioPlayer.mscr
|
+-iGO8
- iGO8.exe
- ....

16. Place the SD card in the Route66.

17. Turn on Route66. It should start normally and show "A->B" and "mp3" icons.

18. Press "A->B" to launch IGO8. Instructions for using IGO8 are elsewhere (use Google).
The big hint here is to setup IGO8 to autodetect the GPS.

19. Press "mp3" to Start WINCE control panel.
This is useful for changing volumes, beeps etc.

Mini kohta on pikk jutt leida kui google otsingusse lüüa: route 66 mini igo

Algselt postitanud urxz

Igatahes on veelgi pikem juhend netis, kopin igaks juhuks siia:
Put the SD you want to use in a PC before you start.
The assumption here is that the PC is running some form of Windows.

1. Put IGO8 on the SD card.

2. Note the path to the executable that you need to launch.
eg. IGO8\IGO8.exe

3. Create a directory named "Route66" on the root of the SD card. Obviously don't use the quotes ;-)

4. Copy the following files to "Route66" directory (use Google to get them):
MortScript.exe
mortrunner.exe (I think is the default name)

5. Create a text file named "R66Navigate7.mscr" in "Route66".

6. Edit the "R66Navigate7.mscr" file.

7. Enter the path to the IGO8 exe using this format:
RunWait("\Storage Card\<path to exe>")

My example is:
Run("\Storage Card\IGO8\IGO8.exe")

8. Rename the the mortrunner.exe to "R66Navigate7.exe"

9. Create a directory named "AudioPlayer" on the root of the SD card.

10. Copy the following files to "AudioPlayer" directory :-
MortScript.exe
mortrunner.exe

11. Create a text file named "AudioPlayer.mscr" in "AudioPlayer".

12. Edit the "AudioPlayer.mscr" file.

13. Enter the path to the control panel using this format:
Run("\windows\control.exe")

14. Rename the the mortrunner.exe to "AudioPlayer.exe"

15. Compress IGO8.exe using UPX Shell with 2.92b compression (use Google to find UPX shell).
Note: Compression of the MortScript.exe's, R66Navigate7.exe and AudioPlayer.exe may be
needed aswell. Can't remember what I did.
Try it without, if an error like "Not a Valid WINCE app" is displayed, then compress them.

16. The structure of the SD card should look like this:

+-Route66
| - MortScript.exe
| - R66Navigate7.exe
| - R66Navigate7.mscr
|
+-AudioPlayer
| - MortScript.exe
| - AudioPlayer.exe
| - AudioPlayer.mscr
|
+-iGO8
- iGO8.exe
- ....

16. Place the SD card in the Route66.

17. Turn on Route66. It should start normally and show "A->B" and "mp3" icons.

18. Press "A->B" to launch IGO8. Instructions for using IGO8 are elsewhere (use Google).
The big hint here is to setup IGO8 to autodetect the GPS.

19. Press "mp3" to Start WINCE control panel.
This is useful for changing volumes, beeps etc.

kuulkoos aga huvitav kas seda saab ka teha ilma arvutis oleva sd lugejata igastahes võin masina kellegile targale ka SmartPostiga saata

lisaks nyyd selle teksti navi ekraanilt kah siia..

the file"\SDMM\2577\Signed\ROUTE 66 MapsWM.CAB" is not valid Windows CE Setup file

Ja kogu lugu..pressin nyyd ok ja hakkan ootama, Teine varjant on muidugi kaart tyhjaks loopida ja vana kola peale tagasi loopida aga tolku sellest pole sest vaid tallinna kaart seal ja tibakese trt kah